Brand New Seagate Cheetah ST3146855LC 146GB 15000RPM Ultra320 80-Pin 16MB 3.5-Inch SCSI Hard Drive
***Rare Brand New Legacy SCSI drives***
Overview: |
The Cheetah 15K proactively scans the media for potential defects during drive idle time without using system bandwidth. It enables incipient errors to be corrected before data is lost. It maintains performance throughout the life of the drive and reduces the probability of lost data. |
|
Specifications: |
Category | Seagate Hard Drive |
Sub-Category | 15K |
Generation | Ultra320 |
Part Number | ST3146855LC |
|
|
Hot Swap Tray | Not Included |
Capacity | 146GB |
Height | 1.0 inch/2.54cm |
Width | 4.0 inch/10.16cm |
Interface | Ultra320 SCSI |
Data Transfer Rate | 320MB/s |
Seek Time | Single Track 0.55ms |
Seek Time | Average 4.9ms |
Seek Time | Full Stroke 10.0ms |
Rotational Speed | 15K |
Bytes/Sector | 512 |
Manufacturer | Seagate |
Application | Server Storage |
Backward Compatability | U2 and U3 Speeds |
Pre-Failure Warranty | Yes |
Data Storage Device Type | SAS (Server Attached Storage) |
Hard Drive Device Type | Hard drive for server/storage unit |
Helpful Hints - Avoid delays and returns by purchasing the correct hard drive for your server:
1) Check your server model w/ the compatibility list above
2) Check the interface of the drives you wish to purchase. Do you need a SAS, SCSI, or SATA?
3) Check the size of the drive compatible w/ your server. Do you need a 3.5" or a 2.5" drive?
4) Check the capacity and speed of the drive. How many GB and what RPM?
At Yobitech, we realize that your purchases are often Mission Critical and any delays are costly. Answering the 4 questions above will ensure that you receive the correct hard drive for your server needs.